The heat is on: 5 top tips for central heating

PUBLISHED: 14:00 11 March 2017 | UPDATED: 10:47 13 March 2017

A boiler sits on a wall at home

A boiler sits on a wall at home


As winter turns to spring, here are five top tips for fitting, retrofitting and replacing your central heating

Acova's Classic Column Vertical range, available from screwfix.comAcova's Classic Column Vertical range, available from screwfix.com

5 tips for central heating

1. The size of your home, especially the number of bathrooms or shower rooms you have, and how much heating and hot water your household uses, will largely determine your choice of boiler. There are three main types of boiler: regular, system and combi. Regular boilers need a cylinder (to store hot water) and tanks. System boilers also need a hot-water cylinder, which allows them to feed several outlets, such as taps and showers, at the same time, but they don’t need tanks.

2. Combis are a popular choice, as you only have to find room for the boiler itself - there are no tanks or cylinder, although some combis have a built-in tank, which gives the higher flow rate needed in a bigger property. Combis heat water on demand, so you only pay for what you use, and they deliver it at mains pressure. Combis are most suitable for homes with one bathroom/shower room, although they can work in homes with two, providing they’re powerful enough. If you have more bathrooms than that, a combi probably isn’t suitable.

3. If you’re renovating a property that hasn’t been updated in decades, it may be necessary to change the whole central heating system. A new boiler, cylinder, radiators and adjustable radiator valves should make a big difference to how good - and efficient - the system is, but don’t overlook the pipework. If the central heating system is gravity fed and you’re switching to a pressurised system, the pipework will be under pressure for the first time and may leak as a result. Old copper pipework may not be done to today’s standards and may even be leaking without you knowing, so leaving it in place can be a false economy. Most plumbers now use plastic pipework where it can’t be seen, such as under floorboards, because it’s quicker and easier to fit than copper. They should use copper where it can be seen, such as radiator pipes, and close to the boiler, where it’s too hot for plastic.

Adjusting the thermostat in a homeAdjusting the thermostat in a home

4. If your boiler has a hot-water cylinder, you may want to get rid of it by fitting a combi, or relocate the cylinder, as new cylinders are often a different shape and size to old ones. This could free up space in your bathroom for a shower cubicle where the airing cupboard/cylinder was, for example. Old boilers also tend to be large, but many new ones aren’t and some are so small that they fit in a kitchen wall unit, saving space and giving the kitchen a neater look because the boiler’s hidden.

5. Think about any big home improvements, such as an extension or loft conversion, you may make in future and how this will impact on the boiler. Will the existing boiler be able to comfortably supply more radiators and bathrooms, or will you need a new one? If there’s a tank for the boiler in the loft and you’re planning to convert the loft, the tank will probably have to be changed to one that fits in the eaves’ storage, so a boiler without tanks may be better.


If a radiator has chipped paint, use wood filler to fill the chip and when the filler has set, sand it smooth, wipe it clean and cover it with a little non-yellowing radiator paint to match.

If you value what this story gives you, please consider supporting the Ham&High. Click the link in the orange box above for details.

Become a supporter

This newspaper has been a central part of community life for many years. Our industry faces testing times, which is why we're asking for your support. Every contribution will help us continue to produce local journalism that makes a measurable difference to our community.

Latest from the Hampstead Highgate Express